Overview
19-26
19.1.14 server
RADIUS Configuration Commands
Use this command to configure the server certificate parameters used by the RADIUS server. The server
certificate is a part of a trustpoint created crypto on page 5-17.
Syntax
server trust-point
Parameters
Usage Guidelines
Create a trustpoint using (crypto-pki-trustpoint). Server certificate is created under the trustpoint using
crypto-pki commands. Refer to crypto on page 5-17 for more details.
Example
RFS7000(config-radsrv)#server trust-point TestTP
RFS7000(config-radsrv)#
trust-point (WORD) Trustpoint configuration.
• WORD – Existing trustpoint name.
To Next Page
Loading...
