2-23
low Low speed limit
RFS7000#service diag limit fan 1 low ?
<1000-15000> Limit value from 1000 to 15,000
RFS7000#service diag limit fan 1 low 1100
RFS7000#service diag limit fan 2 low 10000
RFS7000#Sep 01 15:51:54 2006: %DIAG-4-FANUNDERSPEED: Fan case under speed: 8881
RPM is under limit 10000 RPM
RFS7000#service diag limit filesys ?
etc2 /etc2 file system
flash /flash file system
ram /ram file system
RFS7000#service diag limit filesys flash ?
WORD limit from 0.0 to 100.0
RFS7000#service diag limit filesys flash 20
RFS7000#service diag limit filesys etc2 10
RFS7000#service diag limit filesys ram 30
RFS7000#service diag limit load ?
1 during the previous minute
15 during the previous 15 minutes
5 during the previous five minutes
RFS7000#service diag limit load 5 ?
WORD percentage load from 0.0 to 100.0
RFS7000#service diag limit load 5 50
RFS7000#service diag limit maxFDs ?
<0-32767> 0-32767
RFS7000#service diag limit maxFDs 30000
RFS7000#service diag limit pkbuffers ?
<0-65535> limit from 0-65535
RFS7000#service diag limit pkbuffers 4096
RFS7000#service diag limit procRAM ?
WORD limit from 0.0-100.0
RFS7000#service diag limit procRAM 10
RFS7000#service diag limit ram ?
WORD limit from 0.0-100.0
RFS7000#service diag limit ram 20
RFS7000#service diag limit routecache ?
<0-65535> limit from 0-65535
RFS7000#service diag limit routecache 10240
RFS7000#service diag limit temperature ?
<1-8> temperature sensor number
RFS7000#service diag period ?
<100-30000> Diagnostics period <100-30000> default 1000 milliseconds
RFS7000#service diag period 20000
RFS7000#service save-cli
/usr/scripts/genclitree.sh: /usr/scripts/genclitree.sh: 15: eth: not found
CLI command tree is saved as clitree.html.
This tree can be viewed via web at http://<ipaddr>/cli/clitree.html
RFS7000#
RFS7000>service show cli
User Exec mode: