Overview
20-58
hotspot()
Modifies hotspot related parameters.
• allow (rule index) (IP address) – Modifies hotspot allow-list parameters.
Users who have not yet authenticated must be allowed access to these IP
addresses.
• Rule index – Allow-list Rule index (must be between (1-10).
• IP address – Allow-list IP address.
• webpage (external|internal) (failure|login|welcome) – Modifies hotspot
page parameters.
• external – Modifies a hotspot’s External page.
• internal – Modifies hotspot’s Internal page.
• failure – Users are redirected to this Web page if they fail
authentication.
• login – Users are prompted for their username and password within
this Web page.
• welcome – Users are redirected to this Web page after they
authenticate successfully.
• webpage-location (advanced|external|internal) – The location of the Web
pages used for authentication. These pages can either be hosted on the
switch or an external Web Server.
• advanced – Uses login/welcome/failure Web pages created by the
user on the switch.
• external – Uses login/welcome/failure Web pages on an external
server.
• internal – Use login/welcome/failure Web pages created
automatically on the switch.
inactivity-timeout
<60-86400>
Inactivity timeout in seconds. If a frame is not received from a mobile unit for this
interval, the mobile unit is disassociated.
To Next Page
Loading...
Need help?
General
