SOLE Instance
Use (config-sole) instance to configure SOLE related configuration commands.
21.1 SOLE Config Commands
Table 21.1 summarizes the config-sole commands within the switch command line
Table 21.1 Location Engine Config Command Summary
Command Description Ref.
adapter Configures the SOLE Adapter. page 21-2
clrscr Clears the display screen. page 21-3
end Ends current mode and moves to the EXEC mode. page 21-4
exit Ends current mode and moves to the previous mode. page 21-5
help Displays the interactive help system. page 21-6
no Negates a command or set its defaults. page 21-7
service Displays service commands. page 21-8
show Displays running system information. page 21-10
To Next Page
Loading...
