Device Configuration 5 - 141
Figure 5-90 Profile Security - Remote VPN Client tab
38. Refer to the following fields to define Remote VPN Client Configuration settings:
39. Refer to the following fields to define the Remote VPN Client Peer list:
40. Set the following DHCP Peer Authentication settings:
41. Set the following DHCP Peer Localid settings:
Shutdown Select this option to disable the remote VPN client. The default is disabled.
Transform Set Configure the transform set used to specify how traffic is protected within the crypto ACL
defining the traffic that needs to be protected. Select the appropriate traffic set from the
drop-down menu or click the icon next to the drop-down menu to create a new transform
set.
IKEV2 Peer Use the drop-down menu to select the remote IKE v2 peer. Use the icon next to the drop-
down to create a new peer.
Priority Use the spinner to set the priority in which a remote peer is connected. The lower the
number the higher the priority.
Auth Type Use the drop-down menu to specify the DHCP peer authentication type. Options include PSK
and rsa. The default setting is rsa.
Key Provide a 8 - 21 character shared key password for DHCP peer authentication.
Type Select the DHCP peer local ID type. Options include string and autogen-uniqueid. The
default setting is string.
To Next Page
Loading...
