5 - 142 WiNG 5.6 Access Point System Reference Guide
42. Select OK to save the updates made to the Remote VPN Client screen. Selecting Reset reverts the screen to its last saved
configuration.
43. Select the Global Settings tab.
The Global Settings screen provides options for Dead Peer Detection (DPD). DPD represents the actions taken upon the
detection of a dead peer within the IPSec VPN tunnel connection.
Figure 5-91 Profile Security - Global VPN Settings tab
44. Refer to the following fields to define IPSec security, lifetime and authentication settings:
value Set the DHCP peer local ID. The ID cannot exceed 128 characters.
df bit Select the DF bit handling technique used for the ESP encapsulating header. Options
include clear, set and copy. The default setting is copy.
IPsec Lifetime (kb) Set a connection volume lifetime (in kilobytes) for the duration of an IPSec VPN security
association. Once the set volume is exceeded, the association is timed out. Use the
spinner control to set the volume from 500 - 2,147,483,646 kilobytes. The default
settings is 4,608,000 kilobytes.
IPsec Lifetime (seconds) Set a lifetime (in seconds) for the duration of an IPSec VPN security association. Once
the set value is exceeded, the association is timed out. Options include Seconds (120 -
86,400), Minutes (2 - 1,440), Hours (1 - 24) or Days (1). The default setting is 3,600
seconds.
To Next Page
Loading...
