Device Configuration 5 - 245
7. To edit the configuration of an existing port channel, select it from amongst those displayed and select the Edit button. The
Port Channel Basic Configuration screen displays by default.
Figure 5-161 Device Overrides - Port Channels - Basic Configuration tab
8. Set the following port channel Properties:
Description Lists a a short description (64 characters maximum) describing the port channel or
differentiating it from others with similar configurations.
Admin Status A green check mark defines the listed port channel as active and currently enabled with
the access point’s profile. A red “X” defines the port channel as currently disabled and not
available for use. The interface status can be modified with the port channel configuration
as required
Description Enter a brief description for the port channel (64 characters maximum). The description
should reflect the port channel’s intended function.
Admin Status Select the Enabled radio button to define this port channel as active to the profile it
supports. Select the Disabled radio button to disable this port channel configuration
within the profile. It can be activated at any future time when needed. The default setting
is disabled.
To Next Page
Loading...
