Network Configuration 7 - 31
14. Select OK to save the changes, Reset to revert to the last saved configuration or Exit to close the screen.
15. Select the Settings tab.
Figure 7-18 AAA TACACS - Settings screen
Request Timeout Specify the time for the re-transmission of request packets after an unsuccessful attempt.
The default is 3 seconds. If the set time is exceeded, the authentication session is
terminated.
Retry Timeout Factor Set the scaling of retransmission attempts from 50 - 200 seconds. The timeout at each
attempt is the function of the retry timeout factor and the attempt number. 100 (the default
value) implies a constant timeout on each retry. Smaller values indicate more aggressive
(shorter) timeouts. Larger numbers define more conservative (larger) timeouts on each
successive attempt. The default is 100.
To Next Page
Loading...
