7 - 32 WiNG 5.6 Access Point System Reference Guide
16. Set the following AAA TACACS Authentication server configuration parameters:
17. Set the following AAA TACACS Authorization server configuration parameters:
18. Set the following AAA TACACS Accounting server configuration parameters:
19. Select + Add Row and set the following Service Protocol Settings parameters:
Authentication Access
Method
Specify the connection method(s) for authentication requests.
• All – Authentication is performed for all types of access without prioritization.
• Console – Authentication is performed only for console access.
• Telnet – Authentication is performed only for access through Telnet.
• SSH – Authentication is performed only for access through SSH.
• Web – Authentication is performed only for access through the Web interface.
Directed Request Select to enable the AAA TACACS authentication server to be used with the ‘@<server
name>’ nomenclature. The specified server must be present in the list of defined
Authentication servers.
Authorization Access
Method
Specify the connection methods for authorization requests:
• All – Authorization is performed for all types of access without prioritization.
• Console – Authorization is performed only for console access.
• Telnet – Authorization is performed only for access through Telnet.
• SSH – Authorization is performed only for access through SSH.
Allow Privileged
Commands
Select this option to enable privileged commands executed without command
authorization. Privileged commands are commands that can alter/change the
authorization server configuration.
Accounting Access
Method
Specify access methods for accounting server connections.
• All – Accounting is performed for all types of access with none given priority.
• Console – Accounting is performed for console access only.
• Telnet – Accounting is performed only for access through Telnet.
• SSH – Accounting is performed only for access through SSH.
Authentication Failure Select the option to enable accounting upon authentication failures. This setting is
disabled by default.
CLI Commands Select this option to enable accounting for CLI commands. This setting is disabled by
default.
Session Select this option to enable accounting for session start and session stop events. This
setting is disabled by default.
Service Name Provide a 30 character maximum shell service for user authorization.
Service Protocol Enter a protocol for user authentication using the service.
To Next Page
Loading...
