7 - 44 WiNG 5.6 Access Point System Reference Guide
4. Set the following Neighbor Discovery Reachable Time Settings:
5. Set the following Neighbor Solicitation Retransmit Time Settings:
6. Select + Add Row under the Router Advertisement Policy DNS Settings table and set the following:
7. Select + Add Row under the Router Advertisement Policy Domain Name Settings table and define the following
settings:
RA Consistency Flag Select this option to check if parameters advertised by other routers on the local link are in
conflict with those router advertisements by this controller, service platform or access point.
This option is disabled by default.
Router Preference Set a High, Medium or Low preference designation on this router versus other router resource
that may be available to the controller, service platform or access point. The default setting is
medium.
Suppress RA Use this setting to enable or diable the transmission of a router advertisement within the IPv6
packet. This setting is enabled by default.
Unicast Solicited
RA
Select this option to enable the unicast (single destination) transmission of a router
advertisement within the IPv6 packet. This setting is disabled by default.
Advertise ND
Reachable Time in
RA
Select this option not specify the neighbor reachable time in the router advertisements. When
unspecified, the neighbor reachable time configured for the system is advertised.The default
setting is disabled.
Override System ND
Reachable Time in
RA
Set the period for sending neighbor reachable time in the router advertisements. When
unspecified, the neighbor reachable time configured for the system is advertised. The interval
range is from 5,000 - 3,600,000 milliseconds. The default is 5000 milliseconds.
Advertise NS
Retransmit Timer in
RA
Select this option to not specify the neighbor solicitation retransmit timer value in router
advertisements. The default setting is disabled.
Override System NS
Retransmit Interval
in RA
Set the period for sending the neighbor solicitation retransmit timer in router advertisements.
When unspecified, the setting configured for the system is advertised. The interval range is
from 1000 - 3,600,000 milliseconds. The default is 1000 milliseconds.
DNS Server IPv6
Address
Use a DNS server to resolve host names to IPv6 addresses. When an IPv6 host is configured
with the address of a DNS server, the host sends DNS name queries to the server for resolution.
This field is mandatory
DNS Server Lifetime
Type
Set the lifetime afforded to the DNS server resource. Options include expired, External (fixed),
and infinite. The default is External (fixed).
DNS Server Lifetime Set the maximum time the DNS server is available for name resolution. The interval range is
from 1000 - 3,600,000 milliseconds. The default is 10 minutes.
Domain Name Enter a fully qualified domain name (FQDN) is an unambiguous domain name available a router
advertisement resource. To distinguish an FQDN from a regular domain name, a trailing period
is added. For example, somehost.example.com. This field is mandatory
To Next Page
Loading...
