Security Configuration 8 - 21
Figure 8-9 IP SNMP ACL screen
3. Select Add to create a new SNMP firewall rule. Select an existing policy and click Edit to modify the attributes of that
policy’s configuration. Existing policies can be removed by highlighting them and selecting Delete.
Figure 8-10 IP SNMP ACL Add screen
4. Provide a new IP SNMP ACL a Name up to 32 characters in length to help distinguish this ACL from others with similar
rules.
5. Select + Add Row to launch a sub screen where the ACL’s permit/deny and network type rules can be applied.
Allow Select this option to allow the SNMP MIB object traffic. The default setting is to permit SNMP
traffic.
To Next Page
Loading...
