8 - 22 WiNG 5.6 Access Point System Reference Guide
6. Select Add to add additional IP Firewall Rule configurations. Select Remove to remove selected IP Firewall Rules as they
become obsolete for filtering network access permissions.
7. Select OK when completed to update the IP Firewall rules. Select Reset to revert the screen back to its last saved
configuration.
Type Define whether the permit or deny ACL rule applied to the ACL is specific to a Host IP address,
a Network address and subnet mask or is applied to Any. The default setting is Network.
IP If Type is not any, provide the IP address or host name in this field.
To Next Page
Loading...
