Security Configuration 8 - 35
8. Refer to the Device Categorization field to associate a Device Categorization Policy with this Wireless IPS policy.
Select the Add icon to create a new Device Categorization policy, or select the Edit icon to modify an existing Device
Categorization policy.
9. Select OK to update the settings. Select Reset to revert to the last saved configuration. The WIPS policy can be invoked
at any point in the configuration process by selecting Activate Wireless IPS Policy from the upper, left-hand side, of the
access point user interface.
10. Select the WIPS Events tab. Ensure the Activate Wireless IPS Policy option remains selected to enable the screen’s
configuration parameters. This option need to remain selected to apply the WIPS configuration to the access point profile.
The Excessive tab displays by default, with additional MU Anomaly and AP Anomaly tabs also available.
Air Termination Select this option to enable the termination of detected rogue AP devices. Air termination
lets you terminate the connection between your wireless LAN and any access point or
client associated with it. If the device is an access point, all clients dis-associated with
the access point. If the device is a client, its connection with the access point is
terminated. This setting is disabled by default.
Air Termination Channel
Switch
Select this option to allow neighboring access point to switch channels for rogue AP
termination. This setting is disabled by default.
Air Termination Mode If termination is enabled, use the drop-down menu to specify the termination mode used
on detected rogue devices. The default setting is manual.
To Next Page
Loading...
