Diagnostics 11 - 5
12. Select Fetch Historical Events from the lower, right-hand, side of the UI to populate the table with either device or
RF Domain events. The following event data is fetched and displayed:
13. Select Clear Events to clear the event table and begin a new data collection for the specified device.
Timestamp Displays the timestamp (time zone specific) each listed event occurred.
Module Displays the module tracking the listed event. Events detected by other modules are not
tracked.
Message Displays error or status message for each event.
Severity Displays event severity as defined for tracking from the Configuration screen. Severity
options include:
• All Severities – All events are displayed regardless of severity
• Critical – Only critical events are display
• Error – Only errors display
• Warning – Only warnings display
• Informational – Only informational events display, no critical events, errors or
warnings.
Source Displays the MAC address of the device tracked by the selected module.
Hostname Displays the Hostname/IP address of the device tracked by the selected module.
RF Domain Displays the RF Domain where the selected access point MAC address resides.
To Next Page
Loading...
