12 - 46 WiNG 5.6 Access Point System Reference Guide
12. Select Load Image to start loading the captive portal pages image file.
13. Optionally, refer to the Load Image Status field to view the status of the current upload.
14. Select Status tab.
Figure 12-56 Devices Captive Portal Pages - Status screen
IP Address If Advanced is selected, specify the IP address of the server used to transfer files.
This option is not valid for cf, usb1, usb2, usb3 and usb4. If IP address of the server
is provided, a Hostname is not required.
Hostname If needed, specify a Hostname of the server transferring the file. This option is not
valid for cf, usb1, usb2, usb3 and usb4. If a hostname is provided, an IP Address is
not needed.
This field is only available when Server is selected in the From field.
Path/File If Advanced is selected, define the path to the file on the server. Enter the complete
relative path to the file.
User Name If Advanced is selected, provide a user name to access a FTP or SFTP server.
This parameter is required only when the selected protocol is ftp or sftp.
Password If Advanced is selected, provide a password to access the FTP or SFTP server.
This parameter is required only when the selected protocol is ftp or sftp.
To Next Page
Loading...
