EasyManua.ls Logo

Motorola WiNG 5.6 - Page 973

Motorola WiNG 5.6
1048 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WiNG Events 14 - 11
DIAG FREE_NVRAM_INODES 4 [uint] Free INodes on
[str] file system is less than limit [uint]
Log free INodes on file system less than limit
DIAG FREE_RAM_DISK 4 Free [str] file system space,
[str]% is less than limit [str]%
Log free file system space less than limit
DIAG FREE_RAM_INODES 4 [uint] Free INodes on [str]
file system is less than limit [uint]
LOG_FREE_VARFS_INODES
DIAG FD_COUNT 4 FD Usage [uint] is over limit [uint] HUMM
DIAG DISK_USAGE 4 Disk usage too high Log disk utilization usage too high
DIAG NEW_LED_STATE 6 LED state message [str] from
module [str]
Log LED state message from module
DIAG LED_IDENTIFY 6 LED identify sequence [str] Log identification sequence
DHCPSVR RELAY_NO_IFACE 4 Dhcp relay cannot be
allowed on interface [str] as it does not exist
No interface for DHCP relay
DHCPSVR RELAY_IFACE_NO_IP 4 Dhcp relay cannot be
allowed on interface [str] as it does not have an IP
address
No IP address on DHCP relay interface
DHCPSVR RELAY_START 6 DHCP relay agent started on
[str]
DHCP relay agent started
DHCPSVR RELAY_STOP 6 DHCP relay agent stopped DHCP relay agent stopped
DHCPSVR DHCPSVR_START 6 DHCP server is started DHCP server started
DIAG FAN_UNDERSPEED 4 Fan [str] under speed: [uint]
RPM is under limit [uint] RPM
Fan speed under set RPM limit
DIAG ELAPSED_TIME 7 Elapsed time since last diag
run appears to be zero
Log elapsed time since last diagnostic run
DIAG AUTOGEN_TECH_SPRT 6 Auto generated tech-
support dump file [str] [str]
Log generation of tech support dump file
DIAG POE_INIT_FAIL 3 Could not initialize the PoE
manager
Log PoE manager intialization failure
DIAG POE_POWER_LEVEL 4 POE power consumption is
[uint]W which exceeds [uint]% of [uint]W power budget
Log power consumption exceeds power budget limit
DIAG POE_READ_FAIL 3 Could not read from the PoE Log PoE read failure
DIAG POE_STATE_CHANGE 4 port [uint] POE state
changed to [str]
Log PoE state change
DIAG RAID_DEGRADED 4 RAID array is degraded Log RAID array degraded
DIAG RAID_ERROR 4 RAID array management error
[uint]
Log RAID array management error

Table of Contents

Related product manuals