EasyManua.ls Logo

Motorola WiNG 5.6 - Page 974

Motorola WiNG 5.6
1048 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 - 12 WiNG 5.6 Access Point System Reference Guide
DIAG PWRSPLY_FAIL 4 Power supply failure, no longer
redundant
Log power supply failure
DIAG HDD_FAILING 4 HDD is failing Log HDD failure
DIAG UNDER_VOLTAGE 4 Voltage [str]V under low limit
[str]V
Log voltage sensor under low limit
DIAG OVER_VOLTAGE 4 Voltage [str]V over high limit
[str]V
Log voltage sensor over high limit
DIAG LOW_TEMP 6 Temp sensor [str] [str]C under low
limit [str]C
Log temperature sensor under low limit
DIAG HIGH_TEMP 4 Temp sensor [str] [str]C over high
limit [str]C
Log temperature sensor over high limit
DIAG OVER_TEMP 0 Temp sensor [str] [str]C over
maximum limit [str]C Shutdown switch
Log temperature sensor over max limit
DIAG WD_STATE_CHANGE 6 Watchdog is now [str] Log watchdog state
DOT1X DOT1X_SUCCESS 6 Client [qstr] 802.1x/EAP
authentication success on interface [qstr]//802.1x
authentication successful
802.1X authentication successful
DOT1X DOT1X_FAILED 5 Client [qstr] failed 802.1x/EAP
authentication on interface [qstr]//802.1x authentication
failure
802.1X authentication failed
DOT11 COUNTRY_CODE 5 Country of operation
configured to [str]
Country of operation configured
DOT11 COUNTRY_CODE_ERROR 1 Error setting country
of operation. [str]
Error setting country of operation
DOT11 CLIENT_ASSOCIATED 6 Client [qstr] associated
to wlan [qstr] ssid [qstr] on radio [qstr]
Client associated event
DOT11 CLIENT_DISASSOCIATED 6 Client [qstr]
disassociated from wlan [qstr] radio [qstr]: [str] (reason
code:[uint])
Client disassociated
DOT11 CLIENT_DENIED_ASSOC 5 Client [qstr] denied
association on radio [qstr] [str]: [str]
Client denied association
DOT11 CLIENT_ASSOC_IGNORED 6 Client [qstr]
ignored association on radio [qstr] [str]: [str]
Client ignored association
DOT11 WPA_WPA2_SUCCESS 6 Client [qstr]
completed [str] handshake on wlan [qstr] radio [qstr]
Client completed WPA/WPA2 handshake
DOT11 WPA_WPA2_FAILED 5 Client [qstr] failed [str]
handshake on wlan [qstr] radio [qstr]
Client failed WPA/WPA2 handshake
DOT11 WPA_WPA2_KEY_ROTN 6 Rotating wpa/wpa2
group keys on wlan [qstr] /
Rotating WPA/WPA2 group keys on WLAN

Table of Contents

Related product manuals