MUTOH spitfire 90 - Page 180

Spitfire – Maintenance Manual
180
AP-74096, Rev. 1.0, 09/06/05
(2) Printing position alignment
This updates the printing position alignment parameters.
* PrintPos Adj.*
# 1 Head 1A +
-28 -
* PrintPos Adj. *
#1 Head 1B +
-28 -
If the parameter is updated
* PrintPos Adj. * * PrintPos Adj. *
#1 Head 4B + ENTER Update Parameter ?
-48 -
→ → → → →
↓ ENTER
* PrintPos Adj. *
Updating parameter
(3) CW
This updates the CW adjustment parameters.
* CW Adj. *
Gap 1 - 2
-400→ 400 +
0 -
* CW Adj. *
Gap 1 - 3
-400→ 400 +
0 -
If the parameter is updated
* CW Adj. * * CW Adj. *
Gap 1 - 4
-400→ 400 +
ENTER Update Parameter ?
0 -
→ → → → →
↓ ENTER
* CW Adj. *
Updating Parameter