NEC Electra Elite 48/192 - Page 149

C - 30 Call Forward - All Call
Issue 6 Electra Elite
3. Dial the station number or hunt group master number where
incoming calls are to be forwarded.
4. Wait for the confirmation tone, and restore handset or
press
P
.
A winking
T
LED indicates the station is in Call Forward - All Call
mode.
- OR -
The Feature Access or single On/Off key LED (when equipped)
remains on while this setting is assigned on the key.
1. Press Call Forward - All Call On/Off key.
2. Press
P
.
1. Lift the handset or press
P
.
2. Dial Access Code
DB
(set as default).
3. Wait for confirmation tone, and restore the handset or press
P
.
1. Lift the handset or press
P
.
2. Dial Access Code
DG
(set as default).
3. Dial the station number to be forwarded and then the destination
number.
4. Wait for confirmation tone, and restore the handset or press
P
.
To verify (Multiline Terminals only):
To cancel (Multiline Terminal only):
To cancel (Single Line Telephone or Multiline Terminal):
To set at a destination station (Attendant Positions only):