Electra Elite Issue 6
Features and Specifications Manual C - 31
1. Lift the handset or press
P
.
2. Dial Access Code
DH
(set as default).
3. Dial the station number where forwarding is to be canceled.
4. Wait for the confirmation tone, and restore the handset or press
P
.
1. Press
T
.
2. Dial Access Code
FH
.
3. Press
T
.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
Selection 1] Page 2 LK2 to Allow (default: LED On) or Deny (LED
Off) Call Forward - All Call set/reset.
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
Selection 1] Page 2 LK3 to Allow (LED On) or Deny (default: LED
Off) System-wide reset of Call Forward - All Call.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 1 LK1 to allow (default: LED On) Call Forward - All
Call/DND.
This feature can be assigned on Feature Access or One-Touch keys
using Memory Blocks 2-05 (Line Key Selection) and 2-06 (Line Key
Selection for Tenant Mode) or 4-12 (Line Key Selection for
Telephone Mode).
Restrictions:
At default, system-wide cancel of Call Forward - All Call from
Attendant Positions is denied.
Ring Transfer, Camp-On, and Tone Override cannot be set to a
station that has Call Forward - All Call set.
DND and Call Forward - All Call cannot be set at a station at the
same time.
To cancel at a destination station (Attendant Positions only):
To cancel Call Forward - All Call, Busy/No Answer, and Do Not
Disturb system-wide (Attendant Positions only):
To Next Page
Loading...