Electra Elite Issue 6
Features and Specifications Manual C - 51
1. Lift handset or press
P
.
2. Dial the Cancel Access Code for All or Busy/No Answer from
destination (default not assigned).
3. Dial
A
for Internal or
K
for External.
4. Dial CAR key or Station Number to be Forwarded.
5. Go on-hook or press
P
.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
Assignment] to assign Access Codes for Call Forward - Split.
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
Selection 1] Page 2 LK2 to allow (default LED On) or deny (LED Off)
Call Forward Set/Cancel From Destination.
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
Selection 1] Page 2 LK3 to allow (LED On) or deny (default LED Off)
System-Wide reset of Call Forward - All Call.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] to set Page 5 LK4 to allow (LED On) or deny (default
LED Off) Call Forward – Off-Premise.
Use Memory Block 3-04 to specify whether (YS) or not (default NO)
to allow trunk-to-trunk transfer for Call Forward – Off-Premise per
trunk.
Restrictions:
The Split feature is not supported for Call Forward - All Call by the
FEATURE + 60 operation from destination.
The Split feature is not supported for Single On/Off toggle key
operation.
Setting, canceling or Call Forwarding is allowed only when logged
out of ACD.
General:
Even when logging on as an ACD agent, an individual call not
through the Pilot Number is Call Forwarded.
To cancel Call Forward - All or Busy/No Answer Split from
destination CAR key:
To Next Page
Loading...