D - 32 Direct Inward System Access (DISA)
Issue 6 Electra Elite
1. Dial the desired number to connect the system.
2. Dial the station number.
1. Go off-hook.
2. Dial the DISA password set Access Code XX (default not
assigned, System Programmable).
3. Enter the ID code (station number is default).
4. Enter the DISA password
(default:
KKKKKKKKKK
).
5. Enter the new DISA password (maximum: 10 digits).
6. Go on-hook.
1. Go off-hook.
2. Dial the DISA password reset Access Code XX (default not
assigned, System Programmable).
3. Enter the ID code (station number is default). Password is reset.
4. Go on-hook.
1. Go off-hook.
2. Dial the DISA password confirmation Access Code XX (default
not assigned, System Programmable).
3. Enter the ID code. Current password is displayed.
4. Go on-hook.
To place an internal call using DISA:
To change a DISA password:
To reset the DISA password at the Attendant Position:
To confirm a DISA password at the Attendant Position:
To Next Page
Loading...