D - 34 Direct Inward System Access (DISA)
Issue 6 Electra Elite
DISA ID Codes are printed in the SMDR record.
DISA Password is not printed in the SMDR record.
DISA feature is not available on DID. During DISA access and before
entry of a DISA ID Code is completed, press the
,
key to return the
caller to the beginning of the call. The caller must then begin dialing
the DISA Access Code.
With a VRS(4)-U10 ETU installed, the incoming DISA caller can hear
a message telling the caller which digits to enter for DISA access.
The DISA feature allows outgoing trunk calls and internal call
including Voice Mail access (when equipped). Call Forwarding and
VRS(4)-U10 ETU access are not allowed.
To Next Page
Loading...