Electra Elite Issue 6
Features and Specifications Manual D - 65
3. Press the MUTE key to enter the selected function and advance
to the next function key.
4. Repeat steps 2~3 to program function keys F2~F4.
5. After programming function key F4, press the MUTE key to enter
the LCD mode.
6. Press the R/VOL key to set LCD Mode 1 or 2. (LCD mode
1= Electra Professional Terminal, LCD Mode 2 = D
term
Series E
Terminal.)
7. Press the MUTE key to enter Off-Hook Ring mode.
8. Press the R/VOLkey to select Off-Hook Ring ON or OFF.
9. Press the TALK key to exit.
Function keys F1 ~ F4 can be programmed as Line Keys 1~16,
Redial (LNR/SPD), Answer (ANS), Feature (FNC), or Recall.
When assigned, these keys operate the same as on an NEC
Multiline Terminal.
When initially installed, function keys F1~F4 default to Line Keys
1~4 respectively and Off-Hook Ringing defaults to ON.
The D
term
Cordless and D
term
Cordless Lite nomenclature differ slightly on
the dedicated function relay; however, the meaning is the same.
D
term
Cordless D
term
Cordless Lite
TALK talk
CNF conf
TRF transfer
MUTE mute
HOLD hold
R/VOL vol
To Next Page
Loading...