D - 66 D
term
® Cordless Terminal
Issue 6 Electra Elite
1. Press the talk/TALK key, and wait for internal dial tone.
2. Dial the station number, wait for the called party to answer.
3. Talk with the called party.
1. Press the talk/TALK key, and wait for internal dial tone.
2. Dial the Trunk Access Code or press a function key programmed
as a CO line followed by the telephone number. Wait for the
called party to answer.
3. Talk with the called party.
When the handset is in the base unit, lift it.
When the handset is out of the base unit, press the talk/TALK key when
ringing line preference is assigned.
- OR -
Press the flashing function key (when programmed as a line key).
Press the hold/HOLD key.
Press the flashing function key (programmed as a line key).
Press the talk/TALK and conf /CNF keys.
To place an internal call:
To place an outgoing call:
To answer an Incoming Ringing Call:
To place a call on Hold (internal or outside):
To retrieve an outside call from Hold:
To retrieve an internal call from Hold:
To Next Page
Loading...