Electra Elite Issue 6
Features and Specifications Manual D - 67
1. With a call in progress, press the transfer/TRF key, and wait for
internal dial tone.
2. Dial the desired station number.
3. Press the talk/TALK key to release the call.
1. While a call is in progress, press the mute/MUTE key. This
causes the associated Line key to flash.
2. Pressing mute/MUTE again restores the voice path so that both
parties can communicate.
1. With a call in progress, press the conf/CNF key, and wait for
internal dial tone.
2. Place second call, and wait for the party to answer.
3. Press the conf/CNF key to establish the conference call.
1. Press the SPD key.
2. Enter the Trunk Access Code followed by the telephone number
(up to 16 digits).
3. Press the SPD key.
4. Enter the 2-digit buffer number (01~20). Wait for confirmation
tone. The outside Speed Dial is stored in memory.
To transfer a call:
To mute a call:
To place a conference call:
To program Speed Dial (outside - D
term
Cordless only):
To Next Page
Loading...