D - 68 D
term
® Cordless Terminal
Issue 6 Electra Elite
1. Press the SPD key.
2. Enter the station number.
3. Press the SPD key.
4. Enter the 2-digit buffer number (01~20). Wait for confirmation
tone. The internal Speed Dial is stored in memory.
1. Lift the handset, and press the TALK key.
2. Press the SPD key followed by 2-digit buffer number.
3. Wait for answer.
1. Press the SPD key twice.
2. Enter the 2-digit Speed Dial buffer number to be erased. The
telephone number is deleted.
For D
term
Cordless:
1. While the handset is idle, press the R/VOL key.
2. Press the R/VOL key again (within three seconds).
3. Press the R/VOL key again (within three seconds).
Note: When the optional silent alarm is installed, setting the handset to RING OFF
causes the handset to vibrate.
To program Speed Dial (internal - D
term
Cordless only):
To place a call using Speed Dial (D
term
Cordless only):
To delete a Speed Dial buffer (D
term
Cordless only):
To adjust ring volume:
To Next Page
Loading...