D - 86 D
term
® Handset Cordless
Issue 6 Electra Elite
1. Lift the Handset from the Base Unit.
2. Press Talk key.
3. The Talk/Batt.low LED flashes then lights continuously to indicate
an established communication path between the Handset and the
Base unit and dial tone is generated.
4. Dial the number.
5. Talk to the party.
6. When finished, press the Talk key or place Handset back in the
Base unit to disconnect the call.
1. Lift the Handset from the Base Unit.
2. The Talk/Batt.low LED flashes then lights continuously to indicate
established communication path between the Handset and the
Base unit and dial tone is generated.
3. Dial the number.
4. Talk to the party.
5. When finished, press the Talk key or place Handset back in the
Base unit to disconnect the call.
1. Press Hold and return the Handset to the Base unit.
2. To return to the held party press the flashing green line key and
press Talk or pick up the Handset.
Note: After a programmed time the held call recalls to the originating terminal.
To make a call with Auto Talk On:
To Hold a call in progress at the Base unit:
To Next Page
Loading...