E - 22 Elite CallAnalyst
Issue 6 Electra Elite
SYSTEM AVAILABILITY Terminal Type:
All Terminals
Incoming CO/PBX Call
Outgoing CO/PBX Call
Conference CO/PBX Call
Transferred CO/PBX Call
Required Components:
MIFM-U10 ETU
Minimum PC Requirements
PC with Pentium Processor
64 Mb Ram
VGA monitor 800 X 600 res. (SVGA 1024 X 768 recommended)
Windows 95/98 Me, NT-SP 3 or later, 2000
80 Mb free hard drive space
CD-ROM drive (When using CD for installation)
Available serial port and RS-232 cable
Printer for reports
The Elite CallAnalyst software should be installed on a separate PC, but
other applications may be installed. Performance depends on the need for
memory and processing for the other applications.
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use memory Block 1-5-02 (SMDR Print Format) to select ALL
(default) to print all digits or MASK to mask the last four digits of a
telephone number.
Use Memory Block 1-5-13 (Printer Connected selection) to assign a
printer for SMDR.
None
To Next Page
Loading...