Electra Elite Issue 6
Features and Specifications Manual E - 23
Use Memory Block 1-5-14 (Printer Line Feed Control Selection) to
select printout with or without return.
Use memory Block 1-5-25 (SMDR Valid Call Time Assignment) to
specify the SMDR Valid Call Time before SMDR outputs a record.
Incoming transfer or conference calls and outgoing calls are not
output through SMDR until the Valid Call Time has expired.
Use Memory Block 1-5-26 (SMDR Incoming/Outgoing Print
Selection) to assign SMDR to output incoming (INC) calls, outgoing
(OUT) calls, or ALL calls (default).
Use Memory Block 4-56 (SMDR Telephone Print Selection) to select
whether or not a station call record is printed on SMDR. System
Software S5000 or higher and MIFM software version 2.05 or
higher are required.
Use Memory Block 7-1 (Card interface Slot Assignment) to specify
the MIFM-U10 ETU.
Use Memory Block 7-3-01 [MIF (LCR) Assignment] to specify LCR.
Use Memory Block 7-3-02 [MIF (SMDR) Assignment] to specify
SMDR.
Restrictions:
Call records are not provided for internal calls.
Caller ID name is not printed on SMDR.
General:
The following software items are installed on the PC:
• Call Data Manager (CDM) to collect call records from the
system.
• Elite CallAnalyst and Elite CallAnalyst Lite (version depends on
license purchased) to allow reports and other analyst features.
• Scheduler (default installed) to allow reports and database
archival depending on the Elite CallAnalyst version.
• Elite CallAnalyst Manual (default installed, PDF format).
To Next Page
Loading...