Electra Elite Issue 6
Features and Specifications Manual E - 27
When a station with Live Record or Live Monitoring activated is
dropped for 911 - Cut Through, no indication is provided to the
station or CO line.
General
The station user can dial 9+911 or 911 to place a call to the
Emergency services.
Emergency 911 - Cut Through overrides the following features:
• Outgoing Restriction
• LCR
•ARS
• Forced Account Code Verified/Unverified
Emergency 911 is displayed on the terminal at the originating station
of the 911 call.
RELEASED FOR 911 is displayed on the display Multiline Terminal
at the station that was disconnected.
DROPPED 911 is displayed on PS II terminals that are disconnected.
When the line specified by Memory Block 3-69 is set for Trunk
Queuing, the system automatically disconnects the line and
originates 911.
When the line specified by Memory Block 3-69 is held for the Call
Park feature, the system automatically disconnects the line and
originates 911.
When a PBX/CTX access code was assigned using Memory Blocks
1-1-24 (PBX/CTS Access Code Assignment I) or 1-1-25 (PBX/CTS
Access Code Assignment II) and a 911 call is originated on a PBX/
CTX trunk, the system automatically inserts the PBX/CTX access
code.
When the line is dropped by Emergency 911 - Cut Through, SMDR
prints the dropped call as a normal completed call.
When 911 is dialed, SMDR prints the call as a normal call with 911 in
the digits dialed.
When 911 is dialed, the Attendant Position (Port 1 or Port 2) displays
911 Call at XXXX (the station number used to dial 911) for 30
seconds.
To Next Page
Loading...