L - 8 Live Monitoring
Issue 6 Electra Elite
1. Press the Start softkey while the CO caller is leaving a message.
2. Press the Cancel softkey to stop Live Monitoring.
- OR -
Pick up handset to retrieve the call from voice mail.
The caller is heard through the speaker when the caller receives the
beep tone to start recording the message.
Press the Cancel softkey.
Press the Live Monitoring feature access key.
Pick up the handset.
- OR -
Press
P
.
EliteMail CTI
Live Monitoring on EliteMail CTI is only supported using View Call Plus. In
addition the caller must be routed to the Auto Attendant of the CTI first.
To start Manual Live Monitoring while the caller is leaving a
voice mail message:
To start Live Monitoring without display or softkeys using
Automatic mode:
To stop Live Monitoring while the caller is leaving a voice mail
message in Automatic mode:
To stop Live Monitoring without display or softkeys using
Automatic mode:
To retrieve a call during the Live Monitoring Feature:
To Next Page
Loading...