NEC Electra Elite 48/192 - Page 531

S - 26 Speed Dial - Station
Issue 6 Electra Elite
5. Dial the desired telephone number.
6. Press
U
, and enter name using the Character Code Table.
- OR -
7. Use the dial pad to enter the name.

Refer to S-11 Speed Dial Stored Characters.
8. Press
T
.
1. Press
T
.
2. Press
Q
.
3. Press the Feature Access key.
4. Dial
K
.
5. Dial the Trunk or Trunk Group Access Code (maximum four
digits).
6. Dial the desired telephone number.
7. Press
T
.
1. Press
T
.
2. Press
Q
.
3. Press the One-Touch key.
4. Dial
K
.
5. Dial the Trunk or Trunk Group Access Code (maximum four
digits).
6. Dial the desired telephone number.
7. Press
T
.
To program a Feature Access key for Station Speed Dial using a
Multiline Terminal:
To program a One-Touch key for Station Speed Dial using a
Multiline Terminal: