NEC Electra Elite 48/192 - Page 532

Electra Elite Issue 6
Features and Specifications Manual S - 27
1. Lift the handset, and wait for internal dial tone.
2. Dial the Station Speed Dial Program Access Code (default:
GI
).
3. Dial the Station Speed Dial buffer number to be programmed
(
HK
~
II
).
4. Dial the Trunk or Trunk Group Access Code (maximum four
digits).
5. Dial the telephone number to be stored.
6. Restore the handset.
Key Function:
1. Press the desired CO/PBX line key.
2. Press
Q
.
3. Dial the Station Speed Dial buffer number (
HK
~
II
).
Multifunction (Dial Access):
1. Press
Q
.
2. Dial the Station Speed Dial buffer number (
HK
~
II
).
Key Function:
1. Press the desired CO/PBX line key.
2. Press the desired Feature Access or One-Touch key.
Multifunction (Dial Access):
Press the desired Feature Access or One-Touch key.
To program a Station Speed Dial buffer using a Single Line
Telephone:
To use a Station Speed Dial buffer using a Multiline Terminal:
To use a Feature Access or One-Touch key programmed for
Station Speed Dial using a Multiline Terminal: