NEC Electra Elite 48/192 - Page 73

A - 52 Automatic Answer with Delay Message
Issue 6 Electra Elite
7. Record Message.
8. Go on-hook.
1. Press
T
.
2. Dial
HA
.
3. Dial the incoming trunk number (
KK
~
FD
).
KK
indicates All CO/PBX lines.
Note: Dialing 00 sets or cancels the Automated Attendant mode for all trunks when
the trunks are idle. A trunk that is busy when 00 is dialed is not set. To set the
Automated Attendant to a busy trunk, dial the individual trunk number.
4. Press
T
.
1. Press
T
.
2. Dial
HB
.
3. Dial the incoming trunk number (
KK
~
FD
).
KK
indicates All CO/PBX lines.
Note: Dialing 00 sets or cancels the Automated Attendant mode for all trunks when
the trunks are idle. A trunk that is busy when 00 is dialed is not set. To set the
Automated Attendant to a busy trunk, dial the individual trunk number.
4. Press
T
.
1. Receive an incoming CO/PBX call.
2. The Automatic Answer with Delay Message answers the call and
sends a greeting.
3. The outside party hears ringback tone or MOH (System
Programmed).
To set the Automated Attendant /Delay Message Mode from the
Attendant Position:
To cancel the Automated Attendant /Delay Message Mode from
the Attendant Position:
To answer by One Level: