Nokia 7210 SAS-Mxp - Page 126

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
By default, the BOF and configuration file are not encrypted. When encryption is enabled for either file and
a change is saved (using the admin save command), the original file is moved to filename.1 and the
encrypted file becomes the new filename.cfg.
Caution:
When the original file is moved to filename.1, this file is unencrypted. To maintain node
security, delete the unencrypted filename.1 file.
When the BOF is encrypted on the compact flash, the BOF parameters can be modified using the BOF
interactive menu during node startup, and fields can be modified using this menu.
See Configuring BOF encryption for information about configuring BOF encryption. See Configuring the
BOF interactive menu password for information about configuring the BOF interactive menu password.
See Configuring the configuration file encryption for information about configuring configuration file
encryption.
4.1.4 Bootstrap load process
The following figure shows the bootstrap load process.
See 7210 SAS boot options and procedures for more information about platform-specific supported
boot options, and how the specific system processes these options and loads the bootstrap image file
(boot.tim), the TiMOS image (both.tim) and the configuration file to make the system operational and
ready for use.
Figure 4: System initialization: bootstrap load process
Example
The following is a sample of console display when the boot.tim file is located on cf1:/ and the system
boots successfully.
Nokia 7210 Boot ROM. Copyright 2016 Nokia.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
126
SPACER TEXT