Nokia 7210 SAS-Mxp - Page 193

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
uplinkA-address
Syntax
uplinkA-address ip-address/mask
no uplinkA-address
Context
bof
Platforms
7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and
access-uplink mode)
Description
This command configures the uplinkA address.
The no form of this command sets the uplinkA to use DHCP to get the IP and the show bof value reflects
0 for this parameter.
Parameters
ip-address
Specifies the IP address of the BOF. This address must be unique within the subnet and
specified in dotted-decimal notation.
Values a.b.c.d
mask
Specifies the subnet mask length when the IP prefix is specified in CIDR notation. When
the IP prefix is specified in CIDR notation, a forward slash (/) separates the ip-addr from
the mask-length parameter. The mask length parameter indicates the number of bits
used for the network portion of the IP address; the remainder of the IP address is used to
determine the host portion of the IP address.
Values 1 to 30
uplinkB-address
Syntax
uplinkB-address ip-address/mask
no uplinkB-address
Context
bof
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
193
SPACER TEXT