Nokia 7210 SAS-Mxp - Page 195

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
autoneg, speed as uplinkA-speed 10000, duplex as uplinkA-duplex full, as shown in the
following output example.
#uplinkA Port Settings:
uplinkA-port 1/1/26
no uplinkA-autoneg
uplinkA-duplex full
uplinkA-speed 10000
uplinkA-address 0
uplinkA-vlan 0
Default
uplinkA-autoneg
uplinkB-autoneg
Syntax
[no] uplinkB-autoneg
Context
bof
Platforms
7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and
access-uplink mode)
Description
This command enables speed and duplex auto-negotiation on the uplinkB port in the running configuration
and the BOF.
The no form of this command disables the auto-negotiate feature on this port.
Note:
The uplinkB-autoneg command is not valid for 10gig ports. Therefore, whenever the user
selects 10gig ports as uplinkB-port, the uplinkB-autoneg command defaults to no uplinkB-
autoneg, speed as uplinkB-speed 10000, duplex as uplinkB-duplex full, as shown in the following
output example.
#uplinkB Port Settings:
uplinkB-port 1/1/26
no uplinkB-autoneg
uplinkB-duplex full
uplinkB-speed 10000
uplinkB-address 0
uplinkB-vlan 0
Default
uplinkB-autoneg
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
195
SPACER TEXT