Nokia 7210 SAS-Mxp - Page 207

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
Specifies the destination address of the static route in dotted-decimal notation.
Values ip-prefix|ip-prefix-length: ipv4-prefix a.b.c.d (host bits must be zero)
ipv4-prefix-le 0 to 32
ipv6-prefix - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
ipv6-prefix-le - 0 to 128
next-hop ip-address
Specifies the next hop IP address used to reach the destination.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
eth-mgmt-speed
Syntax
eth-mgmt-speed speed
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command configures the speed for the management Ethernet port when auto-negotiation is disabled
in the running configuration and the BOF.
If the port is configured to Auto-negotiate, this parameter is ignored.
Default
speed 100
speed 1000 (applicable only to 7210 SAS-R6 and 7210 SAS-R12)
Parameters
10
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
207
SPACER TEXT