Nokia 7210 SAS-Mxp - Page 394

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Values 0 to 255 for ieee1588-2008
0 to 255 for g8265dot1-2010
24 to 43 for g8275dot1-2014
local-priority
Syntax
local-priority priority
Context
config>system>ptp
config>system>ptp>peer
config>system>ptp>port
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-Sx
10/100GE 64SFP+ 4QSFP28 (standalone), 7210 SAS-T (network and access-uplink)
Description
This command configures the local priority used to choose between PTP timeTransmitters in the best
timeTransmitter clock algorithm (BTCA). This setting is relevant when the profile is set to g8265dot1-2010
or g8275dot1-2014. The parameter is ignored when the profile is set to ieee1588-2008. The value 1 is the
highest priority and 255 is the lowest priority.
For g8265dot1-2010, this command sets the priority to select between timeTransmitter clocks with the
same quality.
For g8275dot1-2014, this command sets the value of the localPriority associated with the Announce
messages received from the external clocks (ptp>peer or ptp>port), or the local clock (PTP).
Default
local-priority 128
Parameters
priority
Specifies the value of the local priority.
Values 1 to 255
log-anno-interval
Syntax
log-anno-interval log-interval
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
394
SPACER TEXT