Nokia 7210 SAS-Mxp - Page 395

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
no log-anno-interval
Context
config>system>ptp
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-Sx
10/100GE 64SFP+ 4QSFP28 (standalone), 7210 SAS-T (network and access-uplink)
Description
This command configures the PTP Announce interval.
Note:
When the G.8275.1 profile is configured, the 7210 SAS supports a log-interval value of –3 only.
The system automatically changes the value to –3 when this profile is configured.
The no form of this command reverts to the default value.
Default
log-anno-interval 1
Parameters
log-interval
Specifies the PTP Announce interval, specified as the logarithm to the base 2, in seconds.
Values –3 to 4, where –3 = 0.125 s, –2 = 0.25 s, –1 = 0.5 s, 0 = 1 s, 1 = 2 s, 2
= 4 s, 3 = 8 s, 4 = 16 s
log-sync-interval
Syntax
log-sync-interval values
no log-sync-interval
Context
config>system>ptp
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-Sx
10/100GE 64SFP+ 4QSFP28 (standalone), 7210 SAS-T (network and access-uplink)
Description
This command configures the message interval used for transmission of multicast synchronization
messages.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
395
SPACER TEXT