Nokia 7210 SAS-Mxp - Page 400

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Context
config>system>ptp>port
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-Sx
10/100GE 64SFP+ 4QSFP28 (standalone), 7210 SAS-T (network and access-uplink)
Description
This command prevents the local port from ever entering the timeReceiver state. This can be used to
ensure that the 7210 SAS never draws synchronization from the attached external device.
This command only applies if the profile is set to g8275dot1-2014.
If the clock-type command is set to ordinary slave, the master-only value is set the false.
Parameters
true
Keyword to prevent the local port from entering the timeReceiver state.
false
Keyword to allow the local port to enter the timeReceiver state or timeTransmitter state.
shutdown
Syntax
[no] shutdown
Context
config>system>ptp>port
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-Sx
10/100GE 64SFP+ 4QSFP28 (standalone), 7210 SAS-T (network and access-uplink)
Description
This command disables or enables a specific PTP port. When the PTP port is shut down, all PTP Ethernet
messages are dropped on the IOM. They are not counted in the PTP message statistics. No PTP packets
are transmitted by the node toward this port.
If the clock-type is ordinary slave or boundary, and PTP is not shut down, the last enabled port cannot
be shut down. This prevents the user from having PTP enabled without any means to synchronize the local
clock to a parent clock.
This command only applies if the profile is set to g8275dot1-2014.
The no form of this command disables the specific PTP port.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
400
SPACER TEXT