7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Default
no shutdown
Special Cases
PTP Protocol Handling
Applies only to the 7210 SAS-Mxp. When the first instance of the PTP protocol is created
and the no shutdown command is issued in the base routing instance, resources are
allocated to enable CPU processing of the protocol. The resources are deallocated when
the last instance is removed from the configuration using the shutdown command.
priority1
Syntax
priority1 priority-value
no priority1
Context
config>system>ptp
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-T (network
and access-uplink)
Description
This command configures the priority1 value of the local clock. This parameter is only used when the
profile is set to ieee1588-2008. This value is used by the BTCA to determine which clock should provide
timing for the network. It is also used as the advertised value in Announce messages and as the local clock
value in data set comparisons.
The no form of this command reverts to the default value.
Default
priority1 128
Parameters
priority-value
Specifies the value of the priority1 field.
Values 0 to 255
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
401
SPACER TEXT
To Next Page
Loading...