Nokia 7210 SAS-Mxp - Page 402

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
priority2
Syntax
priority2 priority-value
no priority2
Context
config>system>ptp
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-Sx
10/100GE 64SFP+ 4QSFP28 (standalone), 7210 SAS-T (network and access-uplink)
Description
This command configures the priority2 value of the local clock. This parameter is only used when the
profile is set to ieee1588-2008 or g8275dot1-2014. This value is used by the BTCA to determine which
clock should provide timing for the network. It is also used as the advertised value in Announce messages
and as the local clock value in data set comparisons.
The no form of this command reverts to the default value.
Default
priority2 128
Parameters
priority-value
Specifies the value of the priority2 field.
Values 0 to 255
profile
Syntax
profile {g8265dot1-2010 | ieee1588-2008 | g8275dot1-2014}
Context
config>system>ptp
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-Sx
10/100GE 64SFP+ 4QSFP28 (standalone), 7210 SAS-T (network and access-uplink)
Description
This command configures the profile for the internal PTP clock. This profile defines the BTCA behavior.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
402
SPACER TEXT