7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Default normal
interval seconds
Specifies the frequency at which this server is queried.
Values 64 to 1024
Default 64
6.20.2.1.9 CRON commands
cron
Syntax
cron
Context
config>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
Commands in this context create scripts, script parameters and schedules that support the Service
Assurance Agent (SAA) functions.
CRON features are saved to the configuration file on both primary and backup control modules. If a control
module switchover occurs, CRON events are restored when the new configuration is loaded. If a control
module switchover occurs during the execution of a CRON script, the failover behavior will be determined
by the contents of the script.
schedule
Syntax
schedule schedule-name [owner schedule-owner]
[no] schedule
Context
config>system>cron
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
414
SPACER TEXT
To Next Page
Loading...