7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Specifies a name for the time-range, up to 32 characters. If the time-range is not populated
the system will assume the assignment to mean ‟all times”. Only one entry without a time-
range is allowed for every type of policy. The system does not allow the user to specify
more than one policy with the same time-range and priority.
priority priority
Specifies the priority of the time-range. Only one time-range assignment of the same type
and priority is allowed.
Values 1 to 10
mac mac-filter-id
Specifies a MAC filter for this tod-suite.
Values 1 to 65535
qos
Syntax
qos policy-id [time-range time-range-name] [priority priority]
no qos policy-id [time-range time-range-name]
Context
config>system>cron>tod-suite>ingress
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command creates time-range based associations of previously created QoS policies. Multiple policies
may be included and each must be assigned a different priority; in case time-ranges overlap, the priority
will be used to determine the prevailing policy. Only a single reference to a policy may be included without
a time-range.
The no form of this command reverts to the default.
Parameters
policy-id
Specifies an egress QoS policy for this tod-suite.
Values 1 to 65535
time-range time-range-name
Specifies a name for the time-range, up to 32 characters. If the time-range is not populated
the system will assume the assignment to mean ‟all times”. Only one entry without a time-
range is allowed for every type of policy. The system does not allow the user to specify
more than one policy with the same time-range and priority.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
429
SPACER TEXT
To Next Page
Loading...