Nokia 7210 SAS-Mxp - Page 467

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
minor
Specifies that a minor alarm output is generated or cleared. This parameter is only
supported on 7210 SAS-T and 7210 SAS-Mxp.
none
Specifies that no alarm output is generated or cleared.
clear-alarm-msg
Syntax
[no] clear-alarm-msg {alarm-msg-text}
Context
config>system>alarm-contact-input
Platforms
7210 SAS-T network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6 and 7210 SAS-R12
Description
This command allows the user to configure a text message for use along with SNMP trap and Log
message that are sent when the system clears an alarm. The system generates a default message if the
message is not configured.
The no form of this command removes the configured alarm clear message.
Parameters
alarm-msg-text
Specifies a printable character string, up to 160 characters.
description
Syntax
description description-string
Context
config>system>alarm-contact-input
Platforms
7210 SAS-T (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6 and 7210 SAS-R12
Description
This command describes an alarm contact input pin. The description provides an indication of the usage or
attribute of the pin. It is stored in the CLI configuration file and helps the user in identifying the purpose of
the pin.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
467
SPACER TEXT