Nokia 7210 SAS-Mxp - Page 501

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
disabled
Specifies that the LLDP agent will not transmit or receive LLDP frames on this port. If there
is remote systems information which is received on this port and stored in other tables,
before the port's admin status becomes disabled, the information will naturally age out.
notification
Syntax
[no] notification
Context
config>port>ethernet>lldp>dstmac
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command enables LLDP notifications.
The no form of this command disables LLDP notifications.
tx-mgmt-address
Syntax
tx-mgmt-address [system]
no tx-mgmt-address
Context
config>port>ethernet>lldp>dstmac
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command specifies which management address to transmit.
The no form of this command reverts value to the default.
Default
no tx-mgmt-address
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
501
SPACER TEXT