Nokia 7210 SAS-Mxp - Page 654

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
script
Syntax
script [script-name] [owner script-owner]
Context
show>system>script-control
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command displays script parameters.
Parameters
script-name
Displays information for the specified script.
script-owner
Displays information for the specified script owner.
Output
The following output is an example of script information, and Table 90: Output fields: script describes the
output fields.
Sample output
7210SAS>show>system>script-control# script
===============================================================================
Script Information
===============================================================================
Script : test
Owner name : TiMOS CLI
Description : asd
Administrative status : enabled
Operational status : enabled
Script source location : ftp://*****:******@xxx.xxx.xxx.x/home/testlab_bgp
/test1.cfg
Last script error : none
Last change : 2015/01/07 17:10:03
===============================================================================
7210SAS>show>cron#
Table 90: Output fields: script
Label Description
Script Displays the name of the script
Owner name Displays the owner name of the script
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
654
SPACER TEXT