2KZ/2K0
1-3-104
(2) Executing a service mode
(3) Description of service mode
Service items Description
Enable
Repaired Unit
Release the disconnection of the cassette and the document feeder.
Description
Restore the system control when the defective unit is replaced to enable the unit.
The menu is displayed only when the unit is detached for failure.
Purpose
Perform when the defective unit is replaced.
Method
1. Enter the service menu.
2. Select [Enable Repaired Unit].
3. Press [Start].
Completion
The unit is automatically powered after execution.
Press the System Menu/Counter key.
Select [Adjust/Maint.]
using the cursor up/down keys.
The selected service mode is run.
Select [Service Setting]
using the cursor up/down keys.
Start
End
The Sys. Menu/Count. menu appears.
The Adjust/Maint. menu appears.
The Service Setting menu appears.
Service Manual Y113010-4
To Next Page
Loading...
Need help?
General
